Skip to content

How to Increase Evenly Across a Row in Knitting

In this guide
  1. Why the pattern does not tell you where
  2. Increasing evenly across a row
  3. Increasing evenly in the round
  4. Decreasing evenly
  5. Write it as a pattern line
  6. Keep your place while you do it

Short answer

When a pattern says to increase evenly across the row, divide your stitch count by the number of increases plus one, and work an increase after that many stitches. In the round, divide by the number of increases without adding one. If the answer is not a whole number, mix the two whole numbers on either side of it so the total still adds up to your stitch count.

Why the pattern does not tell you where

Patterns often say to increase or decrease a number of stitches evenly without saying how often. The method below, from Lion Brand's guide to increasing in a row or in the round (read on 16 November 2026), spreads the changes as evenly as possible across the row or round.

Increasing evenly across a row

  1. Count your stitches.
  2. Add 1 to the number of increases the pattern asks for.
  3. Divide the stitch count by that total.

The extra 1 keeps the last increase from landing on the final stitch. Without it, the article's example would place the increases on stitches 10 through 100, crowded at the end of the row.

Example with a whole number

Our own application of the same method, with 110 stitches and 10 increases: 10 + 1 = 11, and 110 / 11 = 10. Increase once after every 10 stitches, ten times, then work the last 10 stitches plain.

Example with a fraction

The article's example is 100 stitches and 10 increases.

  • 10 + 1 = 11 and 100 / 11 = 9.09.
  • Increase after every 9th stitch nine times, and after the 10th stitch once.
  • Check: 9 x 9 = 81, plus 10 for the longer gap, plus 9 plain stitches after the last increase makes 100.

The article does not say where to put the longer gap. Spreading the longer gap somewhere in the middle of the row is a sensible choice, but that is our suggestion, not the article's rule.

Increasing evenly in the round

In the round there is no edge for the last increase to fall on, so you divide by the number of increases itself.

The article's example is 100 stitches and 11 increases.

  • 100 / 11 = 9.09.
  • Increase after every 9th stitch ten times, and after the 10th stitch once.
  • Check: 9 x 10 = 90, plus 10 makes 100.

Decreasing evenly

Decreases use two stitches each, so the arithmetic is different, and the Lion Brand page itself shows the difficulty. Its example is 100 stitches and 10 decreases: it adds 1, divides to get a decrease about every 10 stitches, and works each decrease over stitches 10 and 11, then 20 and 21, then 30 and 31. A reader comment on the same page argues that this example runs to a stitch that does not exist, and suggests dividing by the number of decreases alone, working pairs at stitches 9 and 10, then 19 and 20.

The article does not answer that comment. So treat a decrease plan as something to check, not copy. Before you start, add up the plain stitches, the decreases and the stitches each decrease uses, and make sure the row ends with exactly the count you expect. The article's own reminder is that when decreasing you are using two stitches every time you decrease.

Write it as a pattern line

Once you have the spacing, write it out so you can follow it. For 100 stitches and 10 increases the plan above reads: work 9 stitches then increase, nine times, then work 10 stitches and increase once, and finish with 9 stitches. Keeping the line on paper stops you recalculating in the middle of the row.

You can try your own numbers in the increase and decrease evenly calculator, which writes the plan as a pattern line for you. Our guide to what rep from asterisk means explains how those repeat lines read.

Keep your place while you do it

The risk with an even-increase row is losing your place halfway through the spacing. Count each gap as you work it and mark off every completed repeat. How to keep track of rows in knitting covers tracking repeats separately from rows.

Row Counter: Knit & Crochet

Counts rows and stitches for knitting and crochet projects, with linked counters and per-row notes.

Get it on Google Play

Free, with one small banner ad on the project list and project details, never on the counter screen. A one-time Craft Pass removes the ads and adds unlimited projects and the full finished-project archive.

Row Counter is a full-screen tap counter with a row counter and a repeat counter linked together, so the repeat counter ticks up each time a pattern repeat completes. You can pin notes to specific rows so they appear when you reach them. It is a counter, not a pattern library, chart reader or calculator, so do the spacing sum first and use the app to follow the plan.

Sources

  1. How to Increase in a Row or in the Round - Lion Brand Yarn

Search the site