Skip to content

Free tool on Row Counter's website

Increase and decrease evenly calculator

Enter the stitches you have and how many to add or remove. You get the spacing written as a pattern line, for a row or for the round, in knitting or crochet wording.

Your row
sts

Result

Pattern lineflat row, knitting
*k9, m1; rep from * 9 times, k10, m1, k9
Stitches after
110

100 stitches ÷ (10 + 1) = 9.09, so every 9th or 10th stitch. Check: 100 stitches worked, 110 left.

How the maths works

Divide the stitches by the increases. Lion Brand's method for a flat row is to add 1 to the number of increases, then divide your stitch count by that. 110 stitches with 10 increases is 110 ÷ 11 = 10, so you increase after every 10th stitch. The extra 1 keeps the last increase from landing on the very edge of the row.

Rows and rounds differ by one. In the round there is no edge, so you divide by the number of increases without adding 1. 100 stitches with 11 increases in the round is 100 ÷ 11, about 9.09.

When it does not divide evenly

100 stitches with 10 increases in a row is 100 ÷ 11 = 9.09. Whole stitches only, so you work some groups of 9 and some of 10. Lion Brand's answer: increase after every 9th stitch nine times, after every 10th stitch once, then work the last 9 stitches plain. Check: 81 + 10 + 9 = 100. The calculator puts the shorter groups first, as that example does, and checks that the groups add back up to your stitch count.

Decreasing evenly

A decrease works two stitches together, so each one uses up 2 stitches. The stitches left over are spread over the gaps between the decreases: one more gap than decreases in a row, as many gaps as decreases in the round. Because of that, you cannot decrease more times than half your stitches. Ask for 6 decreases on 10 stitches and the calculator says it is not possible instead of inventing a stitch.

This is our own working, not a copy of Lion Brand's decrease example. A reader comment on that page points out that its add-one step can ask for a stitch past the end of the row, so we checked every stitch count up to 60 against every number of changes to make sure the groups always add up.

Impossible and edge inputs

Increases cannot be more than your stitches in one pass, because that would need more than one increase in some stitches. Zero changes and fractions are rejected. When the number of increases equals the stitch count, every stitch is worked twice and your stitch count doubles.

What it assumes

  • Knitting increases are written as make one (m1) and decreases as knit two together (k2tog). Swap in your own favourite increase or decrease.
  • Crochet increases work two single crochet in one stitch, decreases use sc2tog. Chain stitches, turning chains and edge stitches are not counted, so use your stitches as the pattern counts them.
  • In a row the line starts at the beginning of the row. In the round, start at the beginning of the round.

Count it as you go

A line like the one above repeats the same group several times. It is easy to lose count of how many repeats you have done, especially if you stop mid-row. Row Counter has a separate repeat counter that you can link to your row counter, so you can tap once per repeat. The calculator itself is a feature of this website, not of the app.

Row Counter: Knit & Crochet

Counts rows and stitches for knitting and crochet projects, with linked counters and per-row notes.

Get it on Google Play

Free, with one small banner ad on the project list and project details, never on the counter screen. A one-time Craft Pass removes the ads and adds unlimited projects and the full finished-project archive.

Search the site