Short answer
What NIOSH found
NIOSH is part of the U.S. Centers for Disease Control and Prevention. Its own NIOSH Sound Level Meter app is the clearest example of what a phone can do under good conditions. According to NIOSH's app page, read on 15 November 2026:
- The app is free to download and, the page says, only available on iOS devices.
- It is accurate within plus or minus 2 dBA, based on testing in a reverberant chamber at the NIOSH acoustics laboratory.
- It meets Type 2 requirements of the IEC 61672-3 sound level meter standard with a calibrated external microphone.
- It can calibrate either the internal or an external microphone.
Each of those points comes with a condition. The plus or minus 2 dBA figure comes from a lab, on a specific platform, with one particular app. The standards claim depends on an external microphone that has itself been calibrated. Take those conditions away and you cannot assume the same result.
NIOSH's page also lists related publications on smartphone sound measurement apps, including titles on directional response, improving the accuracy of smart devices, and using external microphones.
Why Android is harder
The most important line for Android users on the NIOSH page is short: "Verifying the accuracy of an Android-based app is not currently possible."
NIOSH does not give its reasons on that page. The practical point for an Android user is that a reading from one phone should not be assumed to match another phone.
Sound Meter is an Android app, and it describes its readings as everyday estimates.
Measures noise in decibels and logs it over a session, with a PDF or CSV report.
Get it on Google PlayFree with one small banner ad (no full-screen ads). A one-time Pro unlock removes the ad, gives unlimited session history, and adds PDF and CSV export. There is no subscription.
Sound Meter shows a live decibel estimate and can log a session, recording the minimum, average and maximum over minutes or hours, with your own note. That makes it useful for comparing one evening with another on the same phone. It does not turn a phone into a certified instrument.
What makes phone readings drift
Even on a single phone, the number can move for reasons that have nothing to do with the noise:
- Where the microphone points. NIOSH lists a publication on the directional response of smartphone apps, so orientation is a known thing to test. Keep the phone in the same position.
- Cases and covers. A case or your hand over the microphone opening can block or muffle sound.
- Distance. NIDCD notes that your distance from the source is one of the factors that decides how loud a sound is to you. Moving the phone a few steps changes the reading for real, not because of an error.
- The moment you happen to look. A single reading tells you about one second. Noise rises and falls.
How to get more useful readings from a phone
You cannot make a phone a lab instrument, but you can make its estimates more consistent and more useful:
- Use the same phone every time. Compare readings from one device against itself, not against a friend's phone.
- Keep the position fixed. Put the phone down in the same spot, facing the same way, with nothing over the microphone.
- Take the case off if it covers the microphone opening.
- Log over time instead of glancing. A session with minimum, average and maximum tells you far more than a single number.
- Note what was happening. Writing "washing machine on" or "music next door from 11pm" next to a session makes the data mean something later.
- Compare against a known reference if you can. If you have access to a calibrated sound level meter, measure the same steady sound with both and note the difference, so you know roughly how far your phone reads high or low.
Used this way, an app is good at answering questions like: Is it louder on weeknights or weekends? Did it get quieter after we closed the window? Is this room in the quiet range or the loud range?
When you need a real sound level meter
There are situations where an estimate is not good enough:
- Workplace noise. In the UK, HSE's noise at work regulations set action values at 80 and 85 dB(A) and an exposure limit of 87 dB(A). Decisions about hearing protection and hearing protection zones under those rules need proper assessment, not a phone. In the U.S., NIOSH's recommended exposure limit is 85 dBA averaged over an eight-hour workday (NIOSH's page, read on 15 November 2026), and NIOSH describes its own app as measuring workplace noise to determine if workers are exposed to hazardous noise, with the conditions above. You can set a calibration offset in Sound Meter's settings, but the app is not calibrated for legal or medical use.
- Disputes and complaints. If a council, city agency or court will look at a noise level, they use their own measurements and methods. A phone reading is not a substitute.
- Health decisions. If you are worried about hearing damage, a doctor or audiologist is the right next step, not a number on a screen.
For what the different decibel levels mean, see is 85 decibels loud. For neighbour noise, see how loud is too loud for neighbors.
The short version
A good phone app, used carefully, can tell you roughly how loud a place is and how that changes over time. NIOSH reports that its own iOS app reached plus or minus 2 dBA in its laboratory, and meets a Type 2 standard only with a calibrated external microphone. On Android, NIOSH says that accuracy cannot currently be verified. Treat every app reading, including ours, as an estimate.