Skip to content

Tool from Construction Calc

Brick and block calculator

Enter the size of the wall and the size of your brick or block. You get the number to order, with waste added and rounded up. Metric, in mm and m.

Wall and unit
m

m

m²

mm

mm

mm

%

Result

To orderwith waste, rounded up
587
Wall arealength × height
9.00 m²
Area to coverafter openings, times skins
9.00 m²
Per m²one skin, no waste
59.3

(215 + 10) × (65 + 10) mm = 0.016875 m² per unit. 9.00 m² × 1.1 ÷ 0.016875 = 586.666667, rounded up to 587

Count only. It does not include mortar, ties, lintels or a footing.

How the numbers are worked out

Space for one unit. Each brick or block takes up its own face plus one mortar joint along its length and one along its height: (length + joint) × (height + joint). With a 215 × 65 mm brick and a 10 mm joint that is 225 × 75 mm, or 0.016875 m².

Wall area. Length times height, then take off doors, windows and gaps. A single-skin wall is covered once. A double-skin (one-brick) wall is two layers, so this tool doubles the area to cover.

Waste and rounding. The area is multiplied by 1 plus the waste, divided by the space one unit takes, and rounded up to a whole unit. For the sample wall: 9 m² × 1.10 ÷ 0.016875 = 586.7, so 587. This is the same formula and the same 10% waste default as the Blocks and Bricks estimator in Construction Calc.

Bricks and blocks per m²

UnitFaceJointPer m², one skin
UK brick 215 × 65 mm215 × 65 mm10 mm59.3
UK block 440 × 215 mm440 × 215 mm10 mm9.9

These are the defaults in Construction Calc's code. The app's source notes give the UK sizes as the standard work sizes under BS EN 771-1 and BS EN 771-3, and the results match the usual trade figures of about 60 bricks and 10 blocks per m². We did not fetch the standards for this page, so check your own supplier's data sheet and use the Custom option with their measured size if it differs. Add the joint your bricklayer works to as well. The method is in how many bricks per m².

What it assumes

  • The wall is a flat rectangle laid in a plain bond. Decorative bonds that show headers change the count.
  • Metric only. Imperial and American block sizes are in the app, not here.
  • Mortar, sand and cement are not worked out. The app does not estimate them in this calculator either.
  • It is an estimate for ordering. Structural walls and anything under building control need a proper design.

Construction Calc

Works out material quantities and measurements for building jobs, metric first with an imperial mode.

Get it on Google Play

Free with a small banner ad and an occasional full-screen ad after you save. Every calculator is free. A one-time Pro unlock removes the ads, allows unlimited saved jobs, and lets you send a job's materials list to WhatsApp, SMS or email. There is no subscription.

Construction Calc and Botsquash are not affiliated with any brick or block supplier or standards body.

Search the site